How to make shoe soles non-slip: three simple methods

0

Winter ice is often dangerous, as it is easy to slip and get injured, especially if your shoes are unstable and slippery. If your shoes are slippery, you don't have to throw them away – there are three effective ways to make the soles non-slip.

How to make shoe soles non-slip

Use adhesive tape

This method is suitable for those who are looking for a quick and affordable solution. First, thoroughly clean and dry the sole of the shoe. Then take a cloth adhesive plaster and stick it in longitudinal strips on the sole or create crosses in the heel and toe area. This will help avoid slipping even on ice. The disadvantage of this method is its short-term effect. The adhesive plaster must be changed daily, and it does not work in wet snow or wet ice, as it quickly peels off.

Attaching sandpaper or felt

Measure the areas of the sole in the heel and toe area, cut pieces of sandpaper of the appropriate size and glue them with waterproof glue. The rougher the material, the better it will adhere to the surface. If there is a risk of damaging the floor indoors, you can use felt instead of paper. Although sandpaper lasts longer than adhesive tape, it also has its drawbacks. After winter, the sole will have to be cleaned of glue. To avoid unnecessary difficulties, try using double-sided moisture-resistant tape to fix the material.

Applying the sand and glue mixture

Apply superglue to the sole in several areas (on the toe and heel), and then sprinkle them with fine sand. To enhance the effect, you can add small pebbles. The anti-slip effect will last until the sand begins to gradually fall off. In this case, the procedure is easy to repeat to restore adhesion.